Contacts
Get in touch
Close

Contacts

Romania, Cluj-Napoca – 400157
Str. Ploiești Nr. 9

Romania, Vama – 447350
Str. Fermei Nr. 14

+40 774 463 429

info@inteliscience.net

CATIA to NX Training

CATIA to NX Training

CATIA to NX Training: Siemens NX for Experienced CATIA Designers

CATIA to NX training is a short, hands-on Siemens NX course for designers who already work in CATIA, mostly CATIA V5, and now switch to NX. It skips what they already know and covers what is different: the NX way of working, the NX names for familiar CATIA functions, working with converted CATIA data, and your NX templates. inteliScience runs it in-house or live online for up to six participants, on your own parts if you like.

Course at a glance

Format
In-house or live online
Group
Up to 6 participants
Level
Experienced CATIA users
Exercise parts
Your own or ours
Handout
CATIA to NX term mapping
Language
English or German

inteliScience is a Siemens NX, NXOpen and Teamcenter specialist with NX engineers in Cluj-Napoca, Romania. The courses are given by NX engineers from our team who work in NX projects themselves.

This course is part of our Siemens NX training. It is NX for CATIA users: designers who know CATIA well and need to be productive in NX. Moving the CAD data itself is a separate job, covered by our CATIA to NX migration service. Colleagues who are new to 3D CAD are better served by our NX CAD training.

Who the CATIA to NX training is for

A good fit

  • CATIA V5 designers whose company, or whose customer, moves to Siemens NX
  • Suppliers who have to deliver native NX data from a set date
  • Designers who will work with converted CATIA parts and assemblies in NX
  • Design leads and key users who will set up and support the NX standard
  • Teams that run CATIA and NX in parallel for a while

Better served elsewhere

What participants can do after the course

  • Find their way in NX: applications, Part Navigator and Assembly Navigator, roles and the command finder.
  • Translate CATIA habits: from Pad, Pocket and Shaft to Extrude and Revolve, from parameters to expressions, from publications to WAVE links.
  • Work to your NX standard: build parts and assemblies on your templates, with your layers, attributes and reference sets.
  • Handle converted data: check a converted CATIA part, edit it with Synchronous Modeling, and judge when a rebuild is the better choice.
  • Document the NX way: create drawings from your drawing templates, and know where PMI replaces FT&A annotations.
  • Avoid the typical traps: know the places where a CATIA habit leads to a wrong or fragile NX model.

From CATIA to NX: the terms that change

Most functions exist in both systems under other names, and a few names mean something different. We work through this mapping in module 1, hands-on, and participants keep it as a handout.

CATIA V5 to Siemens NX terminology mapping for designers who switch: CATIA term, NX equivalent and what to know
CATIA V5 Siemens NX What to know
Workbenches (Part Design, Assembly Design, Drafting) Applications (Modeling, Assemblies, Drafting) Several applications work on the same part file
CATPart, CATProduct, CATDrawing .prt files for parts, assemblies and drawings Drawings often sit in their own .prt file that references the model (master model)
Specification tree Part Navigator and Assembly Navigator Model history and assembly structure are shown in separate navigators
Pad, Pocket Extrude One command adds or removes material through its Boolean option
Shaft, Groove Revolve Same Boolean logic as Extrude
Rib, Slot Sweep along Guide False friend: the NX command called Rib builds a thin-wall stiffener, like CATIA Stiffener
Edge Fillet Edge Blend Same idea, different name
Parameters and formulas Expressions Named expressions drive features and can be linked between parts
Design table Part Families, or expressions driven by a spreadsheet Choose by how many variants you manage
Publications, contextual links WAVE links (WAVE Geometry Linker) Linked geometry appears as a feature in the Part Navigator
PowerCopy, User Feature User Defined Feature Reusable feature sets, stored in a library
Catalog Reuse Library Standard parts and your own templates in one place
Geometrical Set Layers, categories and feature groups No one-to-one match; your NX standard decides how data is organized
Assembly constraints (Coincidence, Contact, Offset) Assembly constraints (Touch Align, Distance, Angle, Concentric) Components can also be placed without constraints
FT&A annotations PMI Semantic PMI on faces, organized in model views
ENOVIA, 3DEXPERIENCE Teamcenter Where your NX data is managed in a PDM system

Two differences are worth knowing before the course starts. In NX, parts, assemblies and drawings are all .prt files, so file naming and the master model approach matter more than in CATIA. And NX has no direct equivalent of the geometrical set: how construction geometry is organized is a question your NX standard has to answer, with layers, categories and reference sets.

Course agenda: three modules

Module 1

The NX way of working

  1. NX interface, roles, applications and the command finder
  2. Files and structure: .prt files, the master model, reference sets
  3. Templates, units, layers and categories in your NX standard
  4. Sketches and features: Extrude, Revolve, holes, blends and chamfers, each with its CATIA equivalent
  5. Expressions instead of parameters and formulas

Result: a first part built on your NX template, driven by named expressions.

Module 2

Assemblies and converted CATIA data

  1. Assemblies: components, constraints, reference sets and the Assembly Navigator
  2. WAVE links instead of publications and contextual links
  3. Converted CATIA data: what arrives, and how to check it with Examine Geometry and Measure
  4. Editing bodies without history with Synchronous Modeling: Move Face, Replace Face, Resize
  5. When to rebuild a part instead, and how to compare it with the converted body

Result: a converted CATIA assembly checked, edited and constrained in NX.

Module 3

Drawings, PMI and your standards

  1. Drafting: drawing templates, views, sections, dimensions, title blocks filled from attributes
  2. PMI in NX for users of CATIA FT&A
  3. Reuse Library, standard parts and Part Families
  4. Company standards and automatic checks with Check-Mate
  5. CATIA habits that cause trouble in NX, and a final exercise on one of your own parts

Result: a drawing to your standard, and a short list of open points per participant.

The agenda is a starting point, because we plan every switch from CATIA to NX training around your project. In a 30-minute call before the course we shift the weight to what your team needs most, for example more time on converted data if the migration is already running, or more on drawings if NX drawings are due first. Background reading for module 2 is in our guides STEP to parametric in NX and CAD data quality after a migration to Siemens NX.

Course format

  • In-house or live online. At your site, or online with every participant working in their own NX session while the trainer shares the screen and checks the work.
  • Up to six participants. Small enough that every exercise gets looked at.
  • Your parts or ours. Exercises on your own converted CATIA parts under NDA, or on our training parts if your data cannot be used.
  • Your NX templates. If they exist, every exercise uses them. If not, we use a neutral template and note what your standard still needs.
  • Language. English or German.

Prerequisites

  • Working experience with CATIA V5 Part Design, Assembly Design and Drafting.
  • An NX seat for every participant, ideally with the NX release you use in production. For live online courses, NX runs on each participant’s own workstation.
  • Optional: three to five typical parts or one converted assembly, sent a week before the course.
  • No NX experience is needed.

How to book the CATIA to NX training

Course package

CATIA to NX Training

In-house or live online, for groups of up to six participants. We put the modules together with you and send a quote after a short call.

  • Three modules for up to six experienced CATIA designers
  • The CATIA to NX mapping as a handout for your team
  • Exercises on your own converted CATIA parts, if you like
  • Your NX templates and standards used in the exercises
  • A short summary after the course, with open points for your NX standard
Request a course date

What happens after: your designers start real work in NX with the handout at hand. If the data has to move as well, our CATIA to NX migration covers that side.

Before the course

A short preparation

So the course time is spent on your work, not on setup.

  • A 30-minute call to set the focus
  • Three to five typical parts or one converted assembly, under NDA
  • Your NX templates and standards, if they exist
  • An NX seat for every participant

Frequently asked questions about CATIA to NX training

How long does it take a CATIA user to learn Siemens NX?
Experienced CATIA designers do not start from zero: the modeling principles are the same, so a short, focused course is enough to start working in Siemens NX, and speed comes with project practice afterwards. What takes time is unlearning habits that work in CATIA but not in NX. Our CATIA to NX training concentrates on exactly those differences instead of repeating the basics; we agree the focus with you in a short call before the course.
What are the main differences between CATIA V5 and Siemens NX for designers?
The main differences are the file structure, the command names and the way design data is organized. Siemens NX uses .prt files for parts, assemblies and drawings, organizes data with layers, categories and reference sets instead of geometrical sets, uses expressions instead of parameters and WAVE links instead of publications. Several commands have new names, such as Extrude for Pad and Pocket, and some names mean something else, such as Rib. Our course works through these differences hands-on in module 1.
What is the Siemens NX equivalent of CATIA Pad, Pocket and Shaft?
In Siemens NX, Pad and Pocket are both done with Extrude, and Shaft and Groove with Revolve, each with a Boolean option to add or remove material. A CATIA Rib or Slot corresponds to Sweep along Guide, while the NX command called Rib creates a thin-wall stiffener, like CATIA Stiffener. Participants of our training get the full mapping as a handout for the team.
Can CATIA to NX training be run on our own converted CATIA parts?
Yes, and it pays off, because participants meet exactly what they will see in daily work: bodies without history, imported assemblies and their own NX templates. We work with your data under NDA, in-house or in an environment you approve, and prepare the exercises from three to five parts you send a week in advance.
Is CATIA to NX training available online?
Yes. NX courses work well live online when every participant has NX on their own workstation and the trainer can see and check their work. Our CATIA to NX training runs live online or in-house, for up to six participants.
How much does Siemens NX training for CATIA users cost?
The cost of Siemens NX training for CATIA users depends on the modules, the group size and whether the course runs in-house or online. Open courses are usually priced per participant and in-house courses for the whole group, so compare the total for your team. inteliScience puts the CATIA to NX modules together with you and sends a quote after a short call.

Planning the switch from CATIA to NX? Train your designers first.

Tell us how many designers switch, when they start real work in NX, and whether converted data is already waiting. We will propose a course focus and a date that fits your project.

Request a course date

NX engineers as trainers · in-house or live online · up to six participants

Cookie settings

Choose which services we may use on this website. Your choice is stored in your browser for 12 months. You can change it at any time via “Cookie settings” at the bottom of every page.

Strictly necessary

Stores your cookie choice. This cookie cannot be switched off.

Always active
Show cookies
NameProviderPurposeStorage period
is_cookie_consentinteliScienceStores your cookie choice and when you made it12 months

Google Analytics 4 measures page views, traffic sources and form use with a pseudonymous ID. Provider: Google Ireland Ltd. Data may also be processed by Google LLC in the USA (EU–US Data Privacy Framework).

Show cookies
NameProviderPurposeStorage period
_gaGoogleDistinguishes visitors with a pseudonymous ID2 years
_ga_<ID>GoogleStores the session state2 years

Google Ads measures which ads lead to enquiries (conversions) and lets us show our ads to previous visitors (remarketing). Provider: Google Ireland Ltd. Data may also be processed by Google LLC in the USA (EU–US Data Privacy Framework).

Show cookies
NameProviderPurposeStorage period
_gcl_au, _gcl_aw, _gcl_gsGoogleLinks ad clicks to enquiries90 days
_gcl_ls (local storage)GoogleLinks ad clicks to enquiries90 days
IDE (doubleclick.net)GoogleRemarketing and ad measurement13 months

Videos: YouTube videos only load when you press play (via youtube-nocookie.com). Only then does Google receive data.