Contacts
Get in touch
Close

Contacts

Romania, Cluj-Napoca – 400157
Str. Ploiești Nr. 9

Romania, Vama – 447350
Str. Fermei Nr. 14

+40 774 463 429

info@inteliscience.net

NX Engineering Assessment

NX Engineering Assessment

NX Engineering Assessment: A Fixed-Price Review of How Your Team Works in Siemens NX

An NX engineering assessment is a structured review of how a design team uses Siemens NX: its templates, standards, sample parts and workflows, compared with good practice and summarized in a scorecard and a prioritized roadmap. inteliScience runs it as a one-week review for €4,900 fixed: interviews and reviews with two workshop days at your site, two or three focus modules you choose, and a scorecard plus a 6 to 8 page report with a debrief call, one week from kickoff.

Short answer

A Siemens NX assessment answers three questions with evidence from your environment: where your NX process stands, what pays off first and roughly how much effort it takes. One week, with two workshop days at your site; it may conclude that no project is needed.

inteliScience is a Siemens NX, NXOpen and Teamcenter specialist with NX engineers delivering nearshore from Romania.

The assessment is the starting point for engineering process optimization and for our other NX services. If you first want to talk it through at no cost, write to us: someone from our team replies within one working day and sets up a short call. The three steps build on each other, but you can start at any of them.

Three steps from a first look to a project, each with a defined end

Step 1 · free

Free first call

A short call by screen share with an NX engineer about your process and what an assessment would look at.

€0 · no written report

Step 2 · this page

NX Engineering Assessment

One week, two workshop days at your site: interviews and reviews, two or three focus modules, a scorecard and a prioritized roadmap with effort ranges.

€4,900 fixed · 1 week

Step 3 · if needed

Project

Scoped from the roadmap items you choose. Done by your team, by us, or by both together.

Quoted per package

Each step stands on its own. The report is yours to keep, whether or not you take the next step.

NX Engineering Assessment: the short version

  • What it is: a scored review of how your team works in Siemens NX, based on interviews and on your own templates, standards and parts.
  • What it costs: €4,900, fixed for the full scope, including two workshop days at your site. Each further on-site day costs €1,000, travel is charged at cost. Fully credited against a follow-up project ordered within 60 days.
  • How long it takes: one week from kickoff to report, with two workshop days at your site.
  • What you choose: two or three of six focus modules, from process and standards to CATIA-to-NX readiness.
  • What you get: a scorecard, a prioritized roadmap with effort ranges, an honest next-step recommendation, a 6–8 page report and a debrief call.

When an NX engineering assessment makes sense

The assessment is most useful before a decision that costs more than the assessment itself. It is the wrong format when the problem and its fix are already clear.

A good time for an assessment

  • Before a larger NX, Teamcenter or automation project, to set priorities on evidence
  • When two teams or sites work in NX with two different standards
  • Before a switch from CATIA or another CAD system to NX
  • Before an NX upgrade, when many in-house macros and posts depend on the current version
  • When experienced designers retire and their knowledge has to be written down
  • When release, manufacturing or suppliers keep returning the same kind of error

Probably not the right format

  • You know the one problem and need it fixed: talk to us about that service directly
  • You want a first opinion before any budget: start with the free check
  • You need a certification audit for a customer or a quality standard
  • You are choosing between CAD systems and have not decided on NX
  • You need a price for one postprocessor or one training course

Six focus modules: choose two or three

One week is enough to examine two or three topics properly, not all six. You choose the modules at the kickoff call; most teams pick the topics behind their next budget decision.

Module 1 · Process

Process and standards

We look at: templates and start parts, modeling guidelines, naming and attributes, the reuse library, drawing derivation and the release flow to Teamcenter.

Leads to: engineering process optimization

Module 2 · MBD

MBD readiness

We look at: PMI on sample parts against ISO 16792 and ASME Y14.41, how drawings depend on the model, and what suppliers receive (STEP AP242, JT, 3D PDF).

Leads to: MBD consulting

Module 3 · CAM

CAM and postprocessor inventory

We look at: machines and controllers, the posts in use, the tool they were built with, who maintains them, and how NC output is proven before it runs.

Leads to: NX postprocessor development

Module 4 · Code

NXOpen and macro inventory

We look at: in-house journals, NXOpen programs and macros: what exists, who uses it, who maintains it, and what is at risk at the next NX upgrade.

Leads to: NX legacy code modernization

Module 5 · Skills

Training needs

We look at: NX skills per role against what the work requires, NX functions the team does not use yet, and how new designers are onboarded.

Leads to: Siemens NX training

Module 6 · Migration

CATIA-to-NX readiness

We look at: the data to be moved, what survives conversion, the templates and standards needed in NX, and how CATIA users will be retrained.

Leads to: CATIA to NX migration

The MBD module uses the two standards for digital product definition data: ISO 16792:2021 and ASME Y14.41. ISO 16792 supports two methods of application, the 3D model only and the 3D model with a 2D drawing in digital format, so MBD readiness is not an all-or-nothing question. For the CAM module, our NX CAM postprocessor guide explains the difference between Post Builder and Post Configurator posts.

How the assessment runs: one week from kickoff to report

The timeline depends mostly on when your engineers are free for interviews. If the interviews move, the report moves with them; the price does not.

NX Engineering Assessment timeline: phases, timing, what happens and the effort on the customer side
Phase When What happens Your effort
Kickoff call Day 1 Goals, the two or three focus modules, interview list, document request, NDA About one hour with the design or methods lead
Preparation Days 1–2 We read your templates, guidelines and sample parts and prepare the interviews Send the documents and samples you have
Interviews and reviews Days 2–4 Interviews with 3–5 engineers; templates, parts, drawings and the release flow walked through on screen About 60–90 minutes per interviewee
Analysis Day 4 Findings, scores per area, roadmap with effort ranges Answer a few follow-up questions by email
Report and debrief Day 5 Scorecard plus 6–8 page report, debrief call with your decision-makers One to two hours for the debrief

What we need from you

Bring what exists, including drafts and outdated documents. Gaps are findings too.

  • One contact person who schedules the interviews and collects the documents.
  • Three to five engineers for interviews, ideally from different roles: design, drawings, CAD administration or methods, and CAM or PLM if those modules are chosen.
  • Your standards: templates and start parts, the modeling and drawing guideline, attribute lists and naming rules.
  • Sample parts, assemblies and drawings that you consider typical, plus one or two that you consider problematic.
  • Module material: the list of machines and posts for CAM, the list of in-house NXOpen programs and macros, or sample data for a CATIA-to-NX readiness check.
  • Your setup: the NX version, and whether and how you use Teamcenter.
  • A way to see the data: screen share, or files under NDA in an environment you approve. We do not need accounts in your NX or Teamcenter environment.

What you get from the NX Engineering Assessment

01 · Score

A scorecard

Each area scored on a five-level scale, with the evidence from your parts and documents behind every score.

02 · Findings

A findings list

Each finding with where it was seen and why it matters for your process.

03 · Roadmap

A prioritized roadmap

Actions ordered by benefit and effort, each with an effort range and a suggested owner: your team, us or a third party.

04 · Quick wins

Quick wins

Changes your team can make without outside help, such as a template fix or a missing rule in the guideline.

05 · Next step

An honest recommendation

What we would do next, and who should do it. “No project needed” is a possible answer.

06 · Report

Report and debrief

Scorecard plus a 6–8 page report and a debrief call with your decision-makers to discuss the roadmap.

Example: what the scorecard looks like

The scorecard rates each area of the chosen modules on five levels. The table below shows the format for the process and standards module. All values in it are invented for illustration; they are not results from a real assessment.

Example

Illustrative values only · process and standards module

Level 1
Not defined
Level 2
Defined informally, by habit
Level 3
Written down, not used consistently
Level 4
Written down and used
Level 5
Used and checked in NX
Example NX engineering assessment scorecard for the process and standards module, with invented values for illustration only
Area Example score Example evidence Example priority
Templates and start parts 2 of 5 Three different start parts in use; none carries the current attribute list High
Modeling guideline 3 of 5 Guideline exists; sketch and expression rules not followed in several sample parts Medium
Naming and attributes 2 of 5 Material and mass attributes filled in by hand at release High
Reuse library 1 of 5 Standard parts kept in team folders; duplicates found in Teamcenter Medium
Drawing derivation 3 of 5 Drawing template is current; part-family variants drawn one by one Medium
NX–Teamcenter release flow 4 of 5 Workflow steps clear; all checks happen at the last step Low
Design-rule checks 1 of 5 No automated checks; rules checked by eye on the printed drawing High
Skills and onboarding 3 of 5 New designers learn on the job; no written onboarding path Low

Priority is not the inverse of the score. A low score in an area that rarely causes trouble can wait; a medium score in an area that blocks every release comes first. Because each score is backed by evidence, the same scorecard can be applied again after changes, and the comparison shows what has improved.

What the NX Engineering Assessment is not

  • Not a certification audit. It does not certify you against ISO 9001, AS9100 or any other standard, and it does not replace such an audit.
  • Not a performance review. Interviews are about the process. Findings are never attributed to individual engineers.
  • Not a sales workshop. The price is fixed so that the result does not depend on a follow-up order. The roadmap names who could do each item, including your own team.
  • Not a full data audit. We review sample parts and documents, not every part in your vault. Checking all existing data is a separate job, see custom NX quality checks.
  • Not a promise of savings. Effort ranges are estimates. What actually changes is measured later with the same scorecard.
  • Not a system or license audit. We do not review server configuration, license usage or hardware.

Book the NX Engineering Assessment

One price for the full scope, agreed before the kickoff. You know the cost of the answer before you ask the question.

Fixed price — no day rates

NX Engineering Assessment

€4,900 fixed

One week with your team, two workshop days at your site, a scorecard and a roadmap you can act on, with or without us.

  • One week, two workshop days at your site: interviews with 3 to 5 engineers and a review of your templates, standards and sample parts
  • Two or three focus modules of your choice
  • Scorecard and prioritized roadmap with effort ranges
  • An honest next-step recommendation, including “none”
  • A scorecard plus a 6–8 page report and a debrief call
  • Under NDA, without access to your systems

What happens after: you decide what to do with the roadmap. If you want us for some of the items, we quote each one as a package with its own scope.

Book the assessment

About two weeks from kickoff to report · two workshop days on site included

Not sure yet?

Free first call

A first conversation before you commit budget.

  • A short call by screen share with an NX engineer
  • Design, drawing and PMI, data exchange, CAM and release
  • Someone from our team replies within one working day
Write to an NX engineer

Frequently asked questions about the NX Engineering Assessment

What is a Siemens NX assessment?
A Siemens NX assessment is a structured review of how an organization uses NX: its templates, standards, data, workflows and skills, compared with good practice and summarized as findings and recommendations. The scope varies by provider, from a short health check to an audit over several weeks. Our NX Engineering Assessment has a fixed scope: one week of interviews and reviews with two workshop days at your site, two or three focus modules, a scorecard and a prioritized roadmap.
What does an NX process audit include?
An NX process audit usually includes interviews with the people who use NX, a review of templates, guidelines and sample parts, and a written report with findings and priorities. A useful audit rates each area on a defined scale, so that a later audit can show what changed. Ours adds an effort range per roadmap item and an explicit next-step recommendation, which can also be that no project is needed.
How long does a Siemens NX assessment take?
A focused Siemens NX assessment typically needs one to three days of interviews and review, plus time for analysis and reporting; assessments across a whole organization take longer. Our NX Engineering Assessment has two interview and review days and takes about two weeks from kickoff to report, depending on when your engineers are available.
How much does a Siemens NX assessment cost?
Assessments and process workshops for Siemens NX are often quoted individually or by the day, so the total depends on how long they run. Our NX Engineering Assessment has a fixed price of €4,900 for the full scope: one week of interviews and reviews with two workshop days at your site, two or three focus modules, a scorecard, a roadmap, a 6–8 page report and a debrief call. A free first call with an NX engineer is available before that.
Who should take part in an NX engineering assessment?
The people who use and maintain NX every day should take part: designers, the people who make drawings, the CAD administrator or methods engineer, and, depending on the focus, CAM programmers or PLM administrators. The design manager joins the kickoff and the debrief. In our assessment, three to five engineers take part in interviews of about 60 to 90 minutes each.
Does an NX assessment need access to our CAD data or Teamcenter?
Not necessarily. Most of an NX assessment can be done by screen share and with sample files, without access to production systems. In ours, your engineers show templates, parts, drawings and the release flow on screen, and sample files are shared under NDA only if you agree, in an environment you approve. We do not need accounts in your NX or Teamcenter environment.
How is the maturity of an NX design process measured?
NX design process maturity is usually rated per area on a level scale, from not defined to defined, used and checked, with evidence for each rating. Typical areas are templates, modeling guidelines, attributes, reuse, drawings, the release flow, design-rule checks and skills. Our scorecard uses five levels per area and records the evidence behind each score, so that it can be applied again after changes.
Free CAD process check vs paid engineering assessment: what is the difference?
A free check is a short conversation that points to likely problem areas; a paid assessment examines them with evidence and turns them into a plan. Our free first call is a short conversation by screen share with an NX engineer, without a written report. The NX Engineering Assessment adds a week of interviews and reviews of your templates, standards and sample parts, a scorecard and a roadmap with effort ranges.

Get a measured view of your NX process in about two weeks.

Tell us which two or three modules matter most to you and when your engineers are available. We will propose a kickoff date and send the document list.

Book the assessment

€4,900 fixed · one week, two workshop days on site included · further on-site days €1,000 · under NDA · not sure yet? Start with a free first call

Cookie settings

Choose which services we may use on this website. Your choice is stored in your browser for 12 months. You can change it at any time via “Cookie settings” at the bottom of every page.

Strictly necessary

Stores your cookie choice. This cookie cannot be switched off.

Always active
Show cookies
NameProviderPurposeStorage period
is_cookie_consentinteliScienceStores your cookie choice and when you made it12 months

Google Analytics 4 measures page views, traffic sources and form use with a pseudonymous ID. Provider: Google Ireland Ltd. Data may also be processed by Google LLC in the USA (EU–US Data Privacy Framework).

Show cookies
NameProviderPurposeStorage period
_gaGoogleDistinguishes visitors with a pseudonymous ID2 years
_ga_<ID>GoogleStores the session state2 years

Google Ads measures which ads lead to enquiries (conversions) and lets us show our ads to previous visitors (remarketing). Provider: Google Ireland Ltd. Data may also be processed by Google LLC in the USA (EU–US Data Privacy Framework).

Show cookies
NameProviderPurposeStorage period
_gcl_au, _gcl_aw, _gcl_gsGoogleLinks ad clicks to enquiries90 days
_gcl_ls (local storage)GoogleLinks ad clicks to enquiries90 days
IDE (doubleclick.net)GoogleRemarketing and ad measurement13 months

Videos: YouTube videos only load when you press play (via youtube-nocookie.com). Only then does Google receive data.