2D Drawing to PMI in Siemens NX with AI
The video is loaded from YouTube when you play it. Watch on YouTube
2D Drawing to PMI in Siemens NX: Legacy Drawings Become Model-Based Definition
Moving to MBD does not make the 2D drawings go away. Thousands of them still hold the dimensions, fits and notes your parts are made to, and retyping them as PMI by hand is slow and error-prone. Vision4NX, our AI assistant inside Siemens NX, transfers a drawing to PMI on the 3D model in one run, checks it against the sheet for completeness and reports what it could not measure. Your engineer reviews and releases the model.
Short answer
2D drawing to PMI means every dimension, tolerance and note of an existing 2D drawing is created as semantic PMI on the faces of the 3D model, so the model, not the sheet, carries the definition. That is the core step when legacy drawings move to model-based definition (MBD).
inteliScience brings this into your NX with Vision4NX, configured to your drawing standard and your MBD guideline.
This is an MBD use case. Placing PMI on a model from a request in your live session is covered on NX MBD with AI. When a part has no 3D model at all, the first step is PDF to 3D model. The options for moving a drawing archive to MBD, with and without AI, are compared in our guide on how to convert 2D drawings to MBD.
Two reasons to bring 2D drawings into 3D as PMI
We hear the same two situations from companies on the way to MBD, and both end with the same job: the information exists once, on the sheet or on the model, and has to arrive complete on the other side.
Thousands of 2D drawings, and the model should carry them
The company wants to work model-based, but its parts are defined on 2D drawings, often thousands of them. That information should be in 3D now. Transferring it by hand means retyping every dimension, re-entering every tolerance and checking afterwards that nothing was lost: very tedious, and every manual step is a chance for an error.
MBD in place, and still a 2D drawing now and then
The company already works with MBD, but suppliers and the shop floor still ask for a 2D drawing from time to time. So the 2D drawing stays, and everything on it should be transferred identically into 3D: both in one go, without maintaining the same information twice. And it works the other way round too: from the 3D PMI, the 2D drawing.
The demo: an idler pulley drawing transferred to 3D PMI
The video at the top of this page shows one complete run without sound; notes on screen explain each step. It is also on our YouTube channel, with subtitles in English, German and Romanian.
The part is an idler pulley with a master-model drawing: the drawing belongs to the NX model, and its dimensions reference the model’s edges. One click on “Transfer the drawing to 3D” starts the run. Nothing is typed by hand.
| Step | In the demo |
|---|---|
| Dimensions | 13 of 13 drawing dimensions created as PMI on the model faces, with their fits and tolerances: Ø15 N7 Ⓔ on both bearing seats, 15 0/-0.1 for the overall length, (5) and (11) as reference dimensions |
| Notes | 4 of 4 notes of the sheet as PMI notes |
| Value check | The value on the sheet is the guard: a PMI whose value differs from the drawing is taken back |
| Model views | PMI_ALL with every PMI, SECTION A-A for the inner dimensions, NOTES for the general notes on a layer of their own |
| Completeness | Checked against the sheet: nothing missing, no extra PMI |
| Nothing to measure | Where NX has no face to measure, the ridge Ø30 between two cones and the 15° cone angles, the text from the sheet became a PMI note on the face, and the report says so |
| 3D PDF | Written with NX “Publish Technical Data Package” from NX’s native template: model, model views, PMI and notes, readable in any PDF viewer; the title block was left empty in the demo |
| Left out on purpose | GD&T frames and datums were not part of this run |
One honest detail: after the automatic layout, some annotations on this 15 mm part still sit close together. Where each PMI goes follows drafting rules, and in a project those are your rules.
A simple demo: what is configured to your standard
The video shows a deliberately simple case with default settings. Everything in it can be extended and configured to what your company needs, and in a project these settings are written down as rules, so every drawing is transferred the same way.
What is transferred
Dimensions, tolerances, GD&T frames, datums, surface finish and notes: you decide which annotations move from the sheet to the model.
Model views
Which model views exist, which sections they show and which PMI goes into which view, as your MBD guideline defines it.
Layers and placement
Layers, annotation planes and the placement rules from your drafting standard, so the result reads the way your team expects.
Part and drawing templates
Your NX part and drawing templates and your title blocks, with the attributes your process needs.
3D PDF templates
The 3D PDF for suppliers and the shop floor uses your company’s template, or the AI creates one for you.
PMI to 2D drawing
The other direction is configured the same way: from the PMI on the model to a 2D drawing on your template.
Both directions: 2D drawing to PMI, and PMI to 2D drawing
For companies that work with MBD and still send 2D drawings, the point is one definition and no double maintenance. Existing drawings are transferred to PMI once; from then on, the PMI is the master and the drawing is derived from it.
| Direction | Starts from | Delivers | Shown in |
|---|---|---|---|
| 2D drawing to PMI (this page) | An existing 2D drawing of an NX model | PMI on the model faces, model views, a completeness report and a 3D PDF | The demo video on this page |
| PMI to 2D drawing | PMI on the 3D model as the MBD master | A native NX drawing derived from the PMI, on your drawing template | In production use at a machine builder: MBD and 2D drawings case study; the drafting layer is described in AI 2D drawing creation |
Whether the model or the drawing should be the master in your company is a decision of its own, covered in MBD or 2D drawing as the master. What PMI is and what an MBD data set contains beyond it is explained in MBD vs PMI.
How a 2D drawing becomes PMI in Siemens NX
2D drawing to PMI: one drawing, one click, your NX session
Reads the sheet
Every dimension with its value, tolerance and view, and the model faces it refers to.
Creates the PMI
Each dimension as PMI on the model faces, with its tolerance, checked against the value on the sheet.
Sorts into views
Model views, sections and notes on their layers, placed by drafting rules.
Proves it complete
A report against the sheet, then the 3D PDF for everyone without NX.
The engineer has the last word. The report names every point where a measurement became a note, and the engineer reviews the model before it is released as the reference.
The result is native NX PMI: semantic, attached to the geometry and editable like any PMI your designers create. How PMI and model views work in NX itself is shown in our NX PMI tutorial; what goes into a 3D PDF for suppliers is covered in the MBD supplier data package.
Where 2D drawing to PMI fits, and what it does not do
Good fit
- Companies introducing MBD with a large archive of 2D drawings of NX models
- MBD teams that still send 2D drawings to suppliers or the shop floor
- Drawings of similar parts made to one drafting standard
- Engineers who would rather review a completeness report than retype a drawing
Limits we state up front
- The demo shows an NX drawing on its master model; drawings from other CAD systems, older formats or scans are tested on your sheets first
- Where NX has no face to measure, the value becomes a PMI note, and the report says so
- It transfers what the sheet says; it does not decide tolerances or datums
- Dense annotations on small parts need placement rules and a look from the engineer
- A part without a 3D model first needs one, see PDF to 3D model
Control, data and hosting
- One undo step per change. Every PMI the assistant creates is one step in the NX undo list, and a step that NX rejects is rolled back.
- Nothing hidden. The report lists every PMI created, every value taken back and every note that stands in for a measurement.
- Your session, your permissions. The assistant works in the engineer’s own NX session, under the engineer’s license and data permissions.
- The engineer releases. No model becomes the reference without an engineer’s review and release.
- Where the data goes. Part files stay in your network. The AI model is the one you approve: through Anthropic, through cloud providers with EU regions, or hosted in Germany or on premises, decided per project. The background is in our guide to sovereign agentic AI in European manufacturing.
How we bring 2D drawing to PMI into your NX
- Free Intro Call with Live Demo. 45 minutes: we run the demo live and look at the kind of drawings you have.
- Quick Scan, if you want a plan first. Your drawing types, drafting standard, MBD guideline and templates, and one use case to start with.
- NX Sprint. 2D drawing to PMI on your drawings, running in your NX, configured to your annotations, views and templates and tested on typical and difficult sheets.
- Vision4NX Pilot. In your network, on one part family with a small group of engineers, measured on PMI transferred, corrected and released.
- Rollout. More part families and, where you need it, the reverse direction from PMI to 2D drawing.
How the drawing transfer fits into an MBD rollout as a whole, from the guideline to the supplier, is described in our guide to MBD implementation.
AI in your NX · fixed price
NX Sprint
2D drawing to PMI on your drawings, running in your NX: one use case, from the sheet to checked PMI on the model.
- Vision4NX set up in your NX, on your templates
- Annotations, views and layers configured to your standard
- Tested on your drawings, including a difficult one
- A completeness report per drawing
- Rework until acceptance at no extra cost
On-premises or EU cloud · your drawings stay yours
MBD method · your guideline
MBD Consulting
If MBD itself is still being planned, the guideline comes first: which PMI, which model views, which standard and what the supplier receives.
- MBD guideline and model view scheme
- Supplier data package and 3D PDF
- Rollout plan for drawings and teams
Frequently asked questions about 2D drawing to PMI
Can AI convert a 2D drawing into PMI in Siemens NX?
How do you migrate legacy 2D drawings to MBD?
Do you still need 2D drawings with MBD?
Can a 2D drawing be generated from PMI in Siemens NX?
Can every dimension of a 2D drawing become semantic PMI in Siemens NX?
What is a 3D PDF technical data package in Siemens NX?
Send us a drawing you would like to see as PMI.
In a free intro call we run the demo live, look at one of your drawings and tell you which annotations, views and templates a first sprint would cover.
Talk to an NX EngineerSiemens NX, NXOpen and Teamcenter specialists · nearshore from Romania, one hour ahead of CET · on-premises option

